Product Description
Product Description
Screw conveyor is used in many industries, such as building materials, chemical engineering, coal, CZPT and oil, fodder. It is suitable for horizontal or inclined conveyor powdery, granulous and small block material, such as grain, dinas, coal, flour, cement, chemical fertilizer and so on. It cant convey material which is easy to metamorphic, sticky, agglomeration; Using temperature of environment is -20~50ºC,conveying material temperature is ≤200ºC.
Advantages:
High efficiency conveying:
Adopt new hanging type with bearing frame hanging in the middle to increase the delivery space for materials and also reduce the resistance of logistics.together with small diameter,high rotation speed,changed screw pitch to ensure smooth,fast and uniform feeding.
Casually arrangement:
The shell is made of high quality seamless steel tube,each section is connected by the flanges and become a whole piece.No matter it is horizontal 1 or inclined one,it can deliver materials continuously.It can connected and fixed with the auxiliary device and no need for foundation.Taking fully use of space,can be removes and disassembled easily.
Diversified connection:
Inlet and discharging port can use flange connection,cloth connection,cloth with connection,universal interface
connections,and other forms.
Reliable sealing:
The joint of casing tube is with the seepage water device,process hole has carefully improved to avoid materials blocked or
machine stops due to the cement agglomerate inside the tube resulting in rain infiltration.
No need to add oil:
With unique intermediate bearing materials,it can reduce friction and also it is anti-abrasive and can self-lubricate,so it is no
need to add lubricate even running for a long period.What’s more,it also avoid the side effect no on the shaft due to the possible
mixture of lube and materials.
Product Parameters
| Model | LSY 100 | LSY 120 | LSY 140 | LSY 160 | LSY 200 | LSY 250 | LSY 300 | LSY 400 | ||
| Diameter of screw (mm) | 90 | 115 | 135 | 163 | 185 | 237 | 285 | 362 | ||
| Speed of main axis (r/min) | 300 | 300 | 300 | 308 | 260 | 200 | 170 | 170 | ||
| Diameter of main case(mm) | 108 | 133 | 159 | 194 | 219 | 273 | 325 | 402 | ||
| Max capacity (t/h) | 7 | 10 | 15 | 25 | 40 | 60 | 90 | 120 | ||
| Max conveying length (m) | 8 | 10 | 12 | 15 | 18 | 25 | 25 | 25 | ||
| Working angle (degree) | 0~60 | 0~60 | 0~60 | 0~60 | 0~60 | 0~60 | 0~60 | 0~60 | ||
| Motor | model | Length≤7M | Y90S-4 | Y100L1-4 | Y100L2-4 | Y132S-4 | Y132M-4 | Y160L-6 | Y180M-4 | Y180M-4 |
| Power (kw) | 1.1 | 2.2 | 3 | 5.5 | 7.5 | 11 | 18.5 | 18.5 | ||
| model | Lengtth≥7M | Y100L1-4 | Y100L2-4 | Y112M-4 | Y132M-4 | Y160M-4 | Y180L-6 | Y180L-4 | Y180L-4 | |
| Power ( kw) | 2.2 | 3 | 4 | 7.5 | 11 | 15 | 22 | 22 | ||
Detailed Photos
Application:
1.Food Processing 2.Pharmaceutical
3.Powder and energy 4.Petrochemical
5.Chemicals 6.Mining and minerals
7.Feed processing 8.Plastic
Company Profile
FAQ
1).MOQ require?
Our moq is 1 set.(If you need the spare parts,it is also ok).
2).Payment method?
Usually,we accept T/T,Western Union and others, we can’t accept D/P,D/A
3).How to guarantee the quality?
If any machine quality problems, we accept return cargos.
Our warrantity is 18 months, promise your 0 risks purchasing
| Type: | Screw Conveyor |
|---|---|
| Structure: | Inclining Conveyor |
| Material: | Stainless Steel |
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Types of Screw Shafts
Screw shafts come in various types and sizes. These types include fully threaded, Lead, and Acme screws. Let’s explore these types in more detail. What type of screw shaft do you need? Which one is the best choice for your project? Here are some tips to choose the right screw:
Machined screw shaft
The screw shaft is a basic piece of machinery, but it can be further customized depending on the needs of the customer. Its features include high-precision threads and ridges. Machined screw shafts are generally manufactured using high-precision CNC machines or lathes. The types of screw shafts available vary in shape, size, and material. Different materials are suitable for different applications. This article will provide you with some examples of different types of screw shafts.
Ball screws are used for a variety of applications, including mounting machines, liquid crystal devices, measuring devices, and food and medical equipment. Various shapes are available, including miniature ball screws and nut brackets. They are also available without keyway. These components form a high-accuracy feed mechanism. Machined screw shafts are also available with various types of threaded ends for ease of assembly. The screw shaft is an integral part of linear motion systems.
When you need a machined screw shaft, you need to know the size of the threads. For smaller machine screws, you will need a mating part. For smaller screw sizes, the numbers will be denominated as industry Numeric Sizes. These denominations are not metric, but rather in mm, and they may not have a threads-per-inch designation. Similarly, larger machine screws will usually have threads that have a higher pitch than those with a lower pitch.
Another important feature of machine screws is that they have a thread on the entire shaft, unlike their normal counterparts. These machine screws have finer threads and are intended to be screwed into existing tapped holes using a nut. This means that these screws are generally stronger than other fasteners. They are usually used to hold together electronic components, industrial equipment, and engines. In addition to this, machine screws are usually made of a variety of materials.
Acme screw
An Acme screw is the most common type of threaded shaft available. It is available in a variety of materials including stainless steel and carbon steel. In many applications, it is used for large plates in crushing processes. ACME screws are self-locking and are ideal for applications requiring high clamping force and low friction. They also feature a variety of standard thread forms, including knurling and rolled worms.
Acme screws are available in a wide range of sizes, from 1/8″ to 6″. The diameter is measured from the outside of the screw to the bottom of the thread. The pitch is equal to the lead in a single start screw. The lead is equal to the pitch plus the number of starts. A screw of either type has a standard pitch and a lead. Acme screws are manufactured to be accurate and durable. They are also widely available in a wide range of materials and can be customized to fit your needs.
Another type of Acme screw is the ball screw. These have no back drive and are widely used in many applications. Aside from being lightweight, they are also able to move at faster speeds. A ball screw is similar to an Acme screw, but has a different shape. A ball screw is usually longer than an Acme screw. The ball screw is used for applications that require high linear speeds. An Acme screw is a common choice for many industries.
There are many factors that affect the speed and resolution of linear motion systems. For example, the nut position and the distance the screw travels can all affect the resolution. The total length of travel, the speed, and the duty cycle are all important. The lead size will affect the maximum linear speed and force output. If the screw is long, the greater the lead size, the higher the resolution. If the lead length is short, this may not be the most efficient option.
Lead screw
A lead screw is a threaded mechanical device. A lead screw consists of a cylindrical shaft, which includes a shallow thread portion and a tightly wound spring wire. This spring wire forms smooth, hard-spaced thread convolutions and provides wear-resistant engagement with the nut member. The wire’s leading and trailing ends are anchored to the shaft by means appropriate to the shaft’s composition. The screw is preferably made of stainless steel.
When selecting a lead screw, one should first determine its critical speed. The critical speed is the maximum rotations per minute based on the natural frequency of the screw. Excessive backlash will damage the lead screw. The maximum number of revolutions per minute depends on the screw’s minor diameter, length, assembly alignment, and end fixity. Ideally, the critical speed is 80% of its evaluated critical speed. A critical speed is not exceeded because excessive backlash would damage the lead screw and may be detrimental to the screw’s performance.
The PV curve defines the safe operating limits of a lead screw. This relationship describes the inverse relationship between contact surface pressure and sliding velocity. As the PV value increases, a lower rotation speed is required for heavier axial loads. Moreover, PV is affected by material and lubrication conditions. Besides, end fixity, which refers to the way the lead screw is supported, also affects its critical speed. Fixed-fixed and free end fixity are both possible.
Lead screws are widely used in industries and everyday appliances. In fact, they are used in robotics, lifting equipment, and industrial machinery. High-precision lead screws are widely used in the fields of engraving, fluid handling, data storage, and rapid prototyping. Moreover, they are also used in 3D printing and rapid prototyping. Lastly, lead screws are used in a wide range of applications, from measuring to assembly.
Fully threaded screw
A fully threaded screw shaft can be found in many applications. Threading is an important feature of screw systems and components. Screws with threaded shafts are often used to fix pieces of machinery together. Having fully threaded screw shafts ensures that screws can be installed without removing the nut or shaft. There are two major types of screw threads: coarse and fine. When it comes to coarse threads, UTS is the most common type, followed by BSP.
In the 1840s, a British engineer named Joseph Whitworth created a design that was widely used for screw threads. This design later became the British Standard Whitworth. This standard was used for screw threads in the United States during the 1840s and 1860s. But as screw threads evolved and international standards were established, this system remained largely unaltered. A new design proposed in 1864 by William Sellers improved upon Whitworth’s screw threads and simplified the pitch and surface finish.
Another reason for using fully threaded screws is their ability to reduce heat. When screw shafts are partially threaded, the bone grows up to the screw shaft and causes the cavity to be too narrow to remove it. Consequently, the screw is not capable of backing out. Therefore, fully threaded screws are the preferred choice for inter-fragmentary compression in children’s fractures. However, surgeons should know the potential complication when removing metalwork.
The full thread depth of a fully threaded screw is the distance at which a male thread can freely thread into the shaft. This dimension is typically one millimeter shy of the total depth of the drilled hole. This provides space for tap lead and chips. The full-thread depth also makes fully threaded screws ideal for axially-loaded connections. It is also suitable for retrofitting applications. For example, fully threaded screws are commonly used to connect two elements.
Ball screw
The basic static load rating of a ball screw is determined by the product of the maximum axial static load and the safety factor “s0”. This factor is determined by past experience in similar applications and should be selected according to the design requirements of the application. The basic static load rating is a good guideline for selecting a ball screw. There are several advantages to using a ball screw for a particular application. The following are some of the most common factors to consider when selecting a ball screw.
The critical speed limit of a ball screw is dependent on several factors. First of all, the critical speed depends on the mass, length and diameter of the shaft. Second, the deflection of the shaft and the type of end bearings determine the critical speed. Finally, the unsupported length is determined by the distance between the ball nut and end screw, which is also the distance between bearings. Generally, a ball screw with a diameter greater than 1.2 mm has a critical speed limit of 200 rpm.
The first step in manufacturing a high-quality ball screw is the choice of the right steel. While the steel used for manufacturing a ball screw has many advantages, its inherent quality is often compromised by microscopic inclusions. These microscopic inclusions may eventually lead to crack propagation, surface fatigue, and other problems. Fortunately, the technology used in steel production has advanced, making it possible to reduce the inclusion size to a minimum. However, higher-quality steels can be expensive. The best material for a ball screw is vacuum-degassed pure alloy steel.
The lead of a ball screw shaft is also an important factor to consider. The lead is the linear distance between the ball and the screw shaft. The lead can increase the amount of space between the balls and the screws. In turn, the lead increases the speed of a screw. If the lead of a ball screw is increased, it may increase its accuracy. If not, the lead of a ball screw can be improved through preloading, lubrication, and better mounting accuracy.
editor by CX 2023-11-13
China OEM Farm Use Truck Loading and Unloading Flexible Grain Screw Conveyor double set screw shaft collar
Product Description
Farm Use Truck Loading and Unloading Flexible CZPT Screw Conveyor
Description:
The tube screw conveyors have a wide range of applications in powder and granular material handling. Depending on the material being transported, different types of conveyors and feeders can be selected, for example: concrete products (cement, fly ash, filler dust, dust), bituminous products (hot and cold process dust), building ready-mix materials (Dried lime, sand, cement, fillers), glass technology (limestone, soda ash, sand, etc.), foundry (sand, bentonite), etc.
Structure size:
Tubular screw conveyor includes welding end flange, feed port, discharge port, observation window below the feed port and middle hanging bearing, spiral blade welded on the center pipe, the end bearing assembly contains self-adjustment Shaft sealing equipment, splined bushings, and lifting eye for each pipe section. Spiral blade types are small in overall size, compact in size, and spare parts are less in number. Maintenance is easy to install.
Tubular screw conveyor has the following advantages:
1. The structure is relatively simple and the cost is low.
2. Reliable work, easy maintenance and management.
3. Compact size, small cross-section size, small footprint. It is easy to get in and out of hatches and carriages during unloading operations at the port.
4. Sealed delivery can be achieved, which is conducive to the delivery of materials that are easy to fly, hot and odor, can reduce environmental pollution, and improve the working conditions of port workers.
5. Easy to load and unload. The horizontal screw conveyor can be loaded and unloaded at any point on its conveying line; the vertical screw conveyor can be equipped with a relative screw type picking device and can have excellent reclaiming performance; the screw shaft directly contacting the material pile has automatic retrieving. The capacity can be used as a reclaimer for other types of unloading machinery at ports.
6. The reverse conveying can also enable a conveyor to convey material in 2 directions at the same time, namely to the center or away from the center.
7. The unit consumes more energy.
8. The materials are easily crushed and worn in the process of transportation, and the spiral blades and troughs are also worn more seriously.
| Model number | LSY140 | LSY160 | LSY200 | LSY250 | LSY300 | LSY400 | ||
| Screw diameter(mm) | 140 | 163 | 187 | 238 | 290 | 365 | ||
| Rotating speed(r/min) | 300 | 300 | 260 | 200 | 175/300 | 175 | ||
| Outer diameter(mm) | 168 | 194 | 219 | 273 | 325 | 402 | ||
| Max length(m) | 11 | 12 | 13 | 16 | 18 | 18 | ||
| Incline degree(α°) | 0°~60° | 0°~60° | 0°~60° | 0°~60° | 0°~55° | 0°~55° | ||
| Conveying capacity(t/h) | 17-9 | 30-20 | 50-32 | 70-53 | 82-60/120-85 | 140-110 | ||
| Motor | Model | L≤-7 | Y132S-4 | Y132S-4 | Y132M-4 | Y160L-6 | Y180M-4 | Y180M-4 |
| Power(kw) | 5.5 | 5.5 | 7.5 | 11 | 18.5 | 18.5 | ||
| Model | L>7 | Y132S-4 | Y132M-4 | Y160M-4 | Y180L-6 | Y180L-4 | Y180L-4 | |
| Power(kw) | 5.5 | 7.5 | 11 | 15 | 22 | 22 | ||
| Structure: | Conveyor System |
|---|---|
| Material: | Stainless Steel |
| Material Feature: | Oil Resistant, Heat Resistant, Fire Resistant |
| Application: | Chemical Industry, Grain Transport, Mining Transport, Power Plant, Screw Conveyor |
| Condition: | New |
| Product Name: | Tube Type Screw Conveyor |
| Customization: |
Available
| Customized Request |
|---|
Lead Screws and Clamp Style Collars
If you have a lead screw, you’re probably interested in learning about the Acme thread on this type of shaft. You might also be interested in finding out about the Clamp style collars and Ball screw nut. But before you buy a new screw, make sure you understand what the terminology means. Here are some examples of screw shafts:
Acme thread
The standard ACME thread on a screw shaft is made of a metal that is resistant to corrosion and wear. It is used in a variety of applications. An Acme thread is available in a variety of sizes and styles. General purpose Acme threads are not designed to handle external radial loads and are supported by a shaft bearing and linear guide. Their design is intended to minimize the risk of flank wedging, which can cause friction forces and wear. The Centralizing Acme thread standard caters to applications without radial support and allows the thread to come into contact before its flanks are exposed to radial loads.
The ACME thread was first developed in 1894 for machine tools. While the acme lead screw is still the most popular screw in the US, European machines use the Trapezoidal Thread (Metric Acme). The acme thread is a stronger and more resilient alternative to square threads. It is also easier to cut than square threads and can be cut by using a single-point threading die.
Similarly to the internal threads, the metric versions of Acme are similar to their American counterparts. The only difference is that the metric threads are generally wider and are used more frequently in industrial settings. However, the metric-based screw threads are more common than their American counterparts worldwide. In addition, the Acme thread on screw shafts is used most often on external gears. But there is still a small minority of screw shafts that are made with a metric thread.
ACME screws provide a variety of advantages to users, including self-lubrication and reduced wear and tear. They are also ideal for vertical applications, where a reduced frictional force is required. In addition, ACME screws are highly resistant to back-drive and minimize the risk of backlash. Furthermore, they can be easily checked with readily available thread gauges. So, if you’re looking for a quality ACME screw for your next industrial project, look no further than ACME.
Lead screw coatings
The properties of lead screw materials affect their efficiency. These materials have high anti-corrosion, thermal resistance, and self-lubrication properties, which eliminates the need for lubrication. These coating materials include polytetrafluoroethylene (PFE), polyether ether ketone (PEK), and Vespel. Other desirable properties include high tensile strength, corrosion resistance, and rigidity.
The most common materials for lead screws are carbon steel, stainless steel, and aluminum. Lead screw coatings can be PTFE-based to withstand harsh environments and remove oil and grease. In addition to preventing corrosion, lead screw coatings improve the life of polymer parts. Lead screw assembly manufacturers offer a variety of customization options for their lead screw, including custom-molded nuts, thread forms, and nut bodies.
Lead screws are typically measured in rpm, or revolutions per minute. The PV curve represents the inverse relationship between contact surface pressure and sliding velocity. This value is affected by the material used in the construction of the screw, lubrication conditions, and end fixity. The critical speed of lead screws is determined by their length and minor diameter. End fixity refers to the support for the screw and affects its rigidity and critical speed.
The primary purpose of lead screws is to enable smooth movement. To achieve this, lead screws are usually preloaded with axial load, enabling consistent contact between a screw’s filets and nuts. Lead screws are often used in linear motion control systems and feature a large area of sliding contact between male and female threads. Lead screws can be manually operated or mortised and are available in a variety of sizes and materials. The materials used for lead screws include stainless steel and bronze, which are often protected by a PTFE type coating.
These screws are made of various materials, including stainless steel, bronze, and various plastics. They are also made to meet specific requirements for environmental conditions. In addition to lead screws, they can be made of stainless steel, aluminum, and carbon steel. Surface coatings can improve the screw’s corrosion resistance, while making it more wear resistant in tough environments. A screw that is coated with PTFE will maintain its anti-corrosion properties even in tough environments.
Clamp style collars
The screw shaft clamp style collar is a basic machine component, which is attached to the shaft via multiple screws. These collars act as mechanical stops, load bearing faces, or load transfer points. Their simple design makes them easy to install. This article will discuss the pros and cons of this style of collar. Let’s look at what you need to know before choosing a screw shaft clamp style collar. Here are some things to keep in mind.
Clamp-style shaft collars are a versatile mounting option for shafts. They have a recessed screw that fully engages the thread for secure locking. Screw shaft clamp collars come in different styles and can be used in both drive and power transmission applications. Listed below are the main differences between these two styles of collars. They are compatible with all types of shafts and are able to handle axial loads of up to 5500 pounds.
Clamp-style shaft collars are designed to prevent the screw from accidentally damaging the shaft when tightened. They can be tightened with a set screw to counteract the initial clamping force and prevent the shaft from coming loose. However, when tightening the screw, you should use a torque wrench. Using a set screw to tighten a screw shaft collar can cause it to warp and reduce the surface area that contacts the shaft.
Another key advantage to Clamp-style shaft collars is that they are easy to install. Clamp-style collars are available in one-piece and two-piece designs. These collars lock around the shaft and are easy to remove and install. They are ideal for virtually any shaft and can be installed without removing any components. This type of collar is also recommended for those who work on machines with sensitive components. However, be aware that the higher the OD, the more difficult it is to install and remove the collar.
Screw shaft clamp style collars are usually one-piece. A two-piece collar is easier to install than a one-piece one. The two-piece collars provide a more effective clamping force, as they use the full seating torque. Two-piece collars have the added benefit of being easy to install because they require no tools to install. You can disassemble one-piece collars before installing a two-piece collar.
Ball screw nut
The proper installation of a ball screw nut requires that the nut be installed on the center of the screw shaft. The return tubes of the ball nut must be oriented upward so that the ball nut will not overtravel. The adjusting nut must be tightened against a spacer or spring washer, then the nut is placed on the screw shaft. The nut should be rotated several times in both directions to ensure that it is centered.
Ball screw nuts are typically manufactured with a wide range of preloads. Large preloads are used to increase the rigidity of a ball screw assembly and prevent backlash, the lost motion caused by a clearance between the ball and nut. Using a large amount of preload can lead to excessive heat generation. The most common preload for ball screw nuts is 1 to 3%. This is usually more than enough to prevent backlash, but a higher preload will increase torque requirements.
The diameter of a ball screw is measured from its center, called the ball circle diameter. This diameter represents the distance a ball will travel during one rotation of the screw shaft. A smaller diameter means that there are fewer balls to carry the load. Larger leads mean longer travels per revolution and higher speeds. However, this type of screw cannot carry a greater load capacity. Increasing the length of the ball nut is not practical, due to manufacturing constraints.
The most important component of a ball screw is a ball bearing. This prevents excessive friction between the ball and the nut, which is common in lead-screw and nut combinations. Some ball screws feature preloaded balls, which avoid “wiggle” between the nut and the ball. This is particularly desirable in applications with rapidly changing loads. When this is not possible, the ball screw will experience significant backlash.
A ball screw nut can be either single or multiple circuits. Single or multiple-circuit ball nuts can be configured with one or two independent closed paths. Multi-circuit ball nuts have two or more circuits, making them more suitable for heavier loads. Depending on the application, a ball screw nut can be used for small clearance assemblies and compact sizes. In some cases, end caps and deflectors may be used to feed the balls back to their original position.
editor by CX 2023-11-13
China Custom Stainless Steel 304 300 12X12mm Flexible Coupling Shaft with Screws Mechanical Parts screw conveyor shaft design
Product Description
Product Description
| Product name | Flexible Coupling Shaft | |
| Material | carbon steel(cold rolled steel sheet,galvanized steel sheet),stainless steel,copper,brass,aluminum,etc | |
| Surface treatment | All kinds of surface treatment is anodizing, zinc plating, black oxide, chrome plating, powder coating, ect | |
| Size | According to customer’s design or samples | |
| Color | Customized Color |
Product Parameters
Certifications
Packaging & Shipping
Company Profile
| Our company was founded in 2000, specialized in customize springs, axles, screws, plastic/metal stamping parts, CNC machining parts and auto lathe parts. Our main production modes are designing and proofing based on drawings, concepts and samples provided by customers. We provide samples for customers for review, verification and confirmation and then put into production as follows: |
| Our company has 5,000 square meters of production workshops and more than 120 employees divided into 4 workshops – spring / stamping / screw / axle: |
| 1) Spring Department: with 20 sets of 502 computer omnipotent machines, 12 sets of computerized compression spring machines and supporting heat treatment / projector / pull pressure test machines. Daily output: 300,000 pieces of profiled springs and 800,000 pieces of compression springs. |
| 2) Stamping Department: with 25 sets of 10T-45T punches, 3 sets of wire cutting machines and a full set of hardware stamping mold equipment. Providing a full set of services, including proofing, molding, design and stamping. Daily output: 1,200,000 pieces of various types of metal stamping parts. |
| 3) Screw Department: with 45 sets of 0# – 2.5# heading / roll machines. Daily output: 3,000,000 pieces of M1.2 ~ M8 3.5MM ~ 120MM plastic and alloy screws, tacks and rivets. |
| 4) Axle Department: with 21 sets of semi-automatic / automatic toy axle machines. Daily output: 2,000,000 pieces of #1.0 ~ #8.0 various axes / rubbing spent axes. |
| Quality Control | Product Technology |
| we stress the concept of “quality is the life of our enterprise”, using the first 3 pieces product inspection and the whole production inspection ways for strict quality control. Following the requests of RoHS and Heavy Element, we send products to the third party notarization institute for internationally recognized inspection, with complete inspection report. Our factory has our own salt spray machines and can test all kinds of metal surface treatment of anti-rust effect, in order to ensure the quality of our products. | our factory has a group of professional engineering and technical personnel in the processes of design and production, providing professional advice, converting the concepts from guests into controlled products and helping customers to solve professional problems and reduce the production costs. Each department has a number of professional chefs, with the most advanced equipment in the industry, improving our efficiency, quality and stability to produce high quality and inexpensive products. |
| Processes | Credibility |
| In the processes of following up samples / production, we have a number of sales personnel who will make all-out efforts and make quality / delivery / price / needs as per your requirements to meet your expectations as far as possible. | In the terms of credibility, we guarantee the quality of our products, adhere to business ethics and keep commercial secrets. |
FAQ
1. who are we?
We are based in ZheJiang , China, start from 2018,sell to North America(30.00%),Domestic Market(30.00%),Western Europe(10.00%),Northern Europe(9.00%),Oceania(5.00%),Southern Europe(5.00%),South America(4.00%),Southeast Asia(3.00%),Eastern Europe(00.00%),Africa(00.00%),Mid East(00.00%),Central America(00.00%). There are total about 51-100 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
Hardware Products (Stamping Part,Auto Lathe & CNC Turning Parts,CNC Milling Parts,Spring,Shaft,Fastener)
4. why should you buy from us not from other suppliers?
Our company was established in 2000, with over 18 years manufacture experience. We customize high precision metal fittings. Our specialities are: Metal/Plastic Stamping Parts CNC Machining Parts CNC Lathe Parts Springs ,nuts ,screw,bolts etc fasteners
5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,DDP,DDU,Express Delivery;
Accepted Payment Currency:USD,EUR,JPY,CAD,AUD,HKD,GBP,CNY;
Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,Credit Card,PayPal,Western Union,Cash,Escrow;
Language Spoken:English,Chinese,Spanish,Japanese
| After-sales Service: | Custom |
|---|---|
| Warranty: | Custom |
| Condition: | New |
| Certification: | ISO9001 |
| Standard: | DIN |
| Customized: | Customized |
###
| Samples: |
US$ 30/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Product name | Flexible Coupling Shaft |  |
| Material | carbon steel(cold rolled steel sheet,galvanized steel sheet),stainless steel,copper,brass,aluminum,etc | |
| Surface treatment | All kinds of surface treatment is anodizing, zinc plating, black oxide, chrome plating, powder coating, ect | |
| Size | According to customer’s design or samples | |
| Color | Customized Color |
###
| Our company was founded in 2000, specialized in customize springs, axles, screws, plastic/metal stamping parts, CNC machining parts and auto lathe parts. Our main production modes are designing and proofing based on drawings, concepts and samples provided by customers. We provide samples for customers for review, verification and confirmation and then put into production as follows: |
###
| Our company has 5,000 square meters of production workshops and more than 120 employees divided into four workshops – spring / stamping / screw / axle: |
###
| 1) Spring Department: with 20 sets of 502 computer omnipotent machines, 12 sets of computerized compression spring machines and supporting heat treatment / projector / pull pressure test machines. Daily output: 300,000 pieces of profiled springs and 800,000 pieces of compression springs. |
| 2) Stamping Department: with 25 sets of 10T-45T punches, 3 sets of wire cutting machines and a full set of hardware stamping mold equipment. Providing a full set of services, including proofing, molding, design and stamping. Daily output: 1,200,000 pieces of various types of metal stamping parts. |
| 3) Screw Department: with 45 sets of 0# – 2.5# heading / roll machines. Daily output: 3,000,000 pieces of M1.2 ~ M8 3.5MM ~ 120MM plastic and alloy screws, tacks and rivets. |
| 4) Axle Department: with 21 sets of semi-automatic / automatic toy axle machines. Daily output: 2,000,000 pieces of #1.0 ~ #8.0 various axes / rubbing spent axes. |
###
| Quality Control | Product Technology |
we stress the concept of "quality is the life of our enterprise", using the first three pieces product inspection and the whole production inspection ways for strict quality control. Following the requests of RoHS and Heavy Element, we send products to the third party notarization institute for internationally recognized inspection, with complete inspection report. Our factory has our own salt spray machines and can test all kinds of metal surface treatment of anti-rust effect, in order to ensure the quality of our products. |
our factory has a group of professional engineering and technical personnel in the processes of design and production, providing professional advice, converting the concepts from guests into controlled products and helping customers to solve professional problems and reduce the production costs. Each department has a number of professional chefs, with the most advanced equipment in the industry, improving our efficiency, quality and stability to produce high quality and inexpensive products. |
###
| Processes | Credibility |
| In the processes of following up samples / production, we have a number of sales personnel who will make all-out efforts and make quality / delivery / price / needs as per your requirements to meet your expectations as far as possible. |
In the terms of credibility, we guarantee the quality of our products, adhere to business ethics and keep commercial secrets. |
| After-sales Service: | Custom |
|---|---|
| Warranty: | Custom |
| Condition: | New |
| Certification: | ISO9001 |
| Standard: | DIN |
| Customized: | Customized |
###
| Samples: |
US$ 30/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Product name | Flexible Coupling Shaft | |
| Material | carbon steel(cold rolled steel sheet,galvanized steel sheet),stainless steel,copper,brass,aluminum,etc | |
| Surface treatment | All kinds of surface treatment is anodizing, zinc plating, black oxide, chrome plating, powder coating, ect | |
| Size | According to customer’s design or samples | |
| Color | Customized Color |
###
| Our company was founded in 2000, specialized in customize springs, axles, screws, plastic/metal stamping parts, CNC machining parts and auto lathe parts. Our main production modes are designing and proofing based on drawings, concepts and samples provided by customers. We provide samples for customers for review, verification and confirmation and then put into production as follows: |
###
| Our company has 5,000 square meters of production workshops and more than 120 employees divided into four workshops – spring / stamping / screw / axle: |
###
| 1) Spring Department: with 20 sets of 502 computer omnipotent machines, 12 sets of computerized compression spring machines and supporting heat treatment / projector / pull pressure test machines. Daily output: 300,000 pieces of profiled springs and 800,000 pieces of compression springs. |
| 2) Stamping Department: with 25 sets of 10T-45T punches, 3 sets of wire cutting machines and a full set of hardware stamping mold equipment. Providing a full set of services, including proofing, molding, design and stamping. Daily output: 1,200,000 pieces of various types of metal stamping parts. |
| 3) Screw Department: with 45 sets of 0# – 2.5# heading / roll machines. Daily output: 3,000,000 pieces of M1.2 ~ M8 3.5MM ~ 120MM plastic and alloy screws, tacks and rivets. |
| 4) Axle Department: with 21 sets of semi-automatic / automatic toy axle machines. Daily output: 2,000,000 pieces of #1.0 ~ #8.0 various axes / rubbing spent axes. |
###
| Quality Control | Product Technology |
we stress the concept of "quality is the life of our enterprise", using the first three pieces product inspection and the whole production inspection ways for strict quality control. Following the requests of RoHS and Heavy Element, we send products to the third party notarization institute for internationally recognized inspection, with complete inspection report. Our factory has our own salt spray machines and can test all kinds of metal surface treatment of anti-rust effect, in order to ensure the quality of our products. |
our factory has a group of professional engineering and technical personnel in the processes of design and production, providing professional advice, converting the concepts from guests into controlled products and helping customers to solve professional problems and reduce the production costs. Each department has a number of professional chefs, with the most advanced equipment in the industry, improving our efficiency, quality and stability to produce high quality and inexpensive products. |
###
| Processes | Credibility |
| In the processes of following up samples / production, we have a number of sales personnel who will make all-out efforts and make quality / delivery / price / needs as per your requirements to meet your expectations as far as possible. |
In the terms of credibility, we guarantee the quality of our products, adhere to business ethics and keep commercial secrets. |
Screw Shaft Types and Uses
Various uses for the screw shaft are numerous. Its major diameter is the most significant characteristic, while other aspects include material and function are important. Let us explore these topics in more detail. There are many different types of screw shafts, which include bronze, brass, titanium, and stainless steel. Read on to learn about the most common types. Listed below are some of the most common uses for a screw shaft. These include: C-clamps, screw jacks, vises, and more.
Major diameter of a screw shaft
A screw’s major diameter is measured in fractions of an inch. This measurement is commonly found on the screw label. A screw with a major diameter less than 1/4″ is labeled #0 to #14; those with a larger diameter are labeled fractions of an inch in a corresponding decimal scale. The length of a screw, also known as the shaft, is another measure used for the screw.
The major diameter of a screw shaft is the greater of its two outer diameters. When determining the major diameter of a screw, use a caliper, micrometer, or steel rule to make an accurate measurement. Generally, the first number in the thread designation refers to the major diameter. Therefore, if a screw has a thread of 1/2-10 Acme, the major diameter of the thread is.500 inches. The major diameter of the screw shaft will be smaller or larger than the original diameter, so it’s a good idea to measure the section of the screw that’s least used.
Another important measurement is the pitch. This measures the distance between one thread’s tip and the next thread’s corresponding point. Pitch is an important measurement because it refers to the distance a screw will advance in one turn. While lead and pitch are two separate concepts, they are often used interchangeably. As such, it’s important to know how to use them properly. This will make it easier to understand how to select the correct screw.
There are three different types of threads. The UTS and ISO metric threads are similar, but their common values for Dmaj and Pmaj are different. A screw’s major diameter is the largest diameter, while the minor diameter is the lowest. A nut’s major diameter, or the minor diameter, is also called the nut’s inside diameter. A bolt’s major diameter and minor diameter are measured with go/no-go gauges or by using an optical comparator.
The British Association and American Society of Mechanical Engineers standardized screw threads in the 1840s. A standard named “British Standard Whitworth” became a common standard for screw threads in the United States through the 1860s. In 1864, William Sellers proposed a new standard that simplified the Whitworth thread and had a 55 degree angle at the tip. Both standards were widely accepted. The major diameter of a screw shaft can vary from one manufacturer to another, so it’s important to know what size screw you’re looking for.
In addition to the thread angle, a screw’s major diameter determines the features it has and how it should be used. A screw’s point, or “thread”, is usually spiky and used to drill into an object. A flat tipped screw, on the other hand, is flat and requires a pre-drilled hole for installation. Finally, the diameter of a screw bolt is determined by the major and minor diameters.
Material of a screw shaft
A screw shaft is a piece of machine equipment used to move raw materials. The screw shaft typically comprises a raw material w. For a particular screw to function correctly, the raw material must be sized properly. In general, screw shafts should have an axial-direction length L equal to the moving amount k per 1/2 rotation of the screw. The screw shaft must also have a proper contact angle ph1 in order to prevent raw material from penetrating the screw shaft.
The material used for the shaft depends on its application. A screw with a ball bearing will work better with a steel shaft than one made of aluminum. Aluminum screw shafts are the most commonly used for this application. Other materials include titanium. Some manufacturers also prefer stainless steel. However, if you want a screw with a more modern appearance, a titanium shaft is the way to go. In addition to that, screws with a chromium finish have better wear resistance.
The material of a screw shaft is important for a variety of applications. It needs to have high precision threads and ridges to perform its function. Manufacturers often use high-precision CNC machines and lathes to create screw shafts. Different screw shafts can have varying sizes and shapes, and each one will have different applications. Listed below are the different materials used for screw shafts. If you’re looking for a high-quality screw shaft, you should shop around.
A lead screw has an inverse relationship between contact surface pressure and sliding velocity. For heavier axial loads, a reduced rotation speed is needed. This curve will vary depending on the material used for the screw shaft and its lubrication conditions. Another important factor is end fixity. The material of a screw shaft can be either fixed or free, so make sure to consider this factor when choosing the material of your screw. The latter can also influence the critical speed and rigidity of the screw.
A screw shaft’s major diameter is the distance between the outer edge of the thread and the inner smooth part. Screw shafts are typically between two and sixteen millimeters in diameter. They feature a cylindrical shape, a pointy tip, and a wider head and drive than the former. There are two basic types of screw heads: threaded and non-threaded. These have different properties and purposes.
Lead screws are a cost-effective alternative to ball screws, and are used for low power and light to medium-duty applications. They offer some advantages, but are not recommended for continuous power transmission. But lead screws are often quieter and smaller, which make them useful for many applications. Besides, they are often used in a kinematic pair with a nut object. They are also used to position objects.
Function of a screw shaft
When choosing a screw for a linear motion system, there are many factors that should be considered, such as the position of the actuator and the screw and nut selection. Other considerations include the overall length of travel, the fastest move profile, the duty cycle, and the repeatability of the system. As a result, screw technology plays a critical role in the overall performance of a system. Here are the key factors to consider when choosing a screw.
Screws are designed with an external threading that digs out material from a surface or object. Not all screw shafts have complete threading, however. These are known as partially threaded screws. Fully threaded screws feature complete external threading on the shaft and a pointed tip. In addition to their use as fasteners, they can be used to secure and tighten many different types of objects and appliances.
Another factor to consider is axial force. The higher the force, the bigger the screw needs to be. Moreover, screws are similar to columns that are subject to both tension and compression loads. During the compression load, bowing or deflection is not desirable, so the integrity of the screw is important. So, consider the design considerations of your screw shaft and choose accordingly. You can also increase the torque by using different shaft sizes.
Shaft collars are also an important consideration. These are used to secure and position components on the shaft. They also act as stroke limiters and to retain sprocket hubs, bearings, and shaft protectors. They are available in several different styles. In addition to single and double split shaft collars, they can be threaded or set screw. To ensure that a screw collar will fit tightly to the shaft, the cap must not be overtightened.
Screws can be cylindrical or conical and vary in length and diameter. They feature a thread that mates with a complementary helix in the material being screwed into. A self-tapping screw will create a complementary helix during driving, creating a complementary helix that allows the screw to work with the material. A screw head is also an essential part of a screw, providing gripping power and compression to the screw.
A screw’s pitch and lead are also important parameters to consider. The pitch of the screw is the distance between the crests of the threads, which increases mechanical advantage. If the pitch is too small, vibrations will occur. If the pitch is too small, the screw may cause excessive wear and tear on the machine and void its intended purpose. The screw will be useless if it can’t be adjusted. And if it can’t fit a shaft with the required diameter, then it isn’t a good choice.
Despite being the most common type, there are various types of screws that differ in their functions. For example, a machine screw has a round head, while a truss head has a lower-profile dome. An oval-its point screw is a good choice for situations where the screw needs to be adjusted frequently. Another type is a soft nylon tip, which looks like a Half-dog point. It is used to grip textured or curved surfaces.
editor by czh 2022-12-08